基于横向莫尔条纹的自准直测角方法

本文提出了基于横向莫尔条纹的自准直测角方法,用遮光原理分析了莫尔条纹的位移放大作用.并基于该方法搭建了原理光路,得到的莫尔条纹信号稳定且能够满足测量需求.在此基础上对系统进行了定量标定,简化了数据处理步骤,实现了动态测量,系统分辨率达到10″,进一步明确将该方法应用到自准直仪中可以有效提高仪器分辨率.     

Two-dimensional optical coherence tomography for real-time structural dynamical characterization

We present a two-dimensional optical coherence vibration tomography (2DOCVT) system with an ultra-precision displacement resolution of ~0.1 nm that is capable of in site real-time absolute displacement measurement of structural line vibrations. Experimental results of sinusoidal, sweep and impulse vibrations were reported. The key figures of merit such as the 2DOCVT system could obtain fast line vibration measurement without scanning and it also could be used to capture structural modal parameters in one single impulse excitation measurement without any vibration excitation input information, making it attractive for the application in low-frequency vibration measurement and response-only modal analysis.     

一种轿车车轮应力状态测量与分析方法

基于台架应变测试试验方法,研究轿车车轮在疲劳试验中的应力状态。结果表明:车轮的径向疲劳试验时,轮胎会对车轮的载荷产生较大的影响,轮胎与转鼓的挤压变形以及正反转动都会对车轮的应力状态产生影响;车轮径向疲劳试验时,最大应变出现在轮辋与轮胎接触位置沿车轮圆周方向,而在靠近轮心位置的应变较小;车轮弯曲疲劳试验时,最大应变出现在轮辐靠近轮心的位置,最大应变出现在轮辐的长度方向;不同的载荷对车轮应变的变化规律并没有影响,但是会对最大和最小峰值产生影响。     

Electrochemical sensors for environmental gas analysis

The application of electrochemical sensors for measurement of concentration of pollutant gases in air in the part-per-billion (10⁹) range is reviewed. Performance-limiting factors, particularly the effects of extremes and of relatively rapid changes in ambient temperature and humidity, are noted. Variations in composition of the electrolyte in the meniscus at the electrode–gas interface and instability of the solid–liquid–gas contact line, causing important variations in current due to background electrode reactions, are deduced and suggested as the reason for the performance limitations. Suggestions are made for mitigation through instrument design.     

Forces between a hard surface and an air–aqueous interface with and without films

The adsorption of particles to air–aqueous interfaces is vital in many applications, such as mineral flotation and the stabilization of food foams. The forces in the system determine whether a particle will attach to an air–aqueous interface. The forces between a particle and an air–aqueous interface are influenced by Derjaguin–Landau–Verwey–Overbeek forces (i.e. van der Waals and electrostatic forces), non–Derjaguin–Landau–Verwey–Overbeek forces (e.g. hydrophobic, hydrodynamic, structural, and capillary forces), liquid drainage, and liquid flow. As an air–aqueous interface can be deformed by a particle, the forces measured between an air–aqueous interface and a particle can differ from those measured between two hard surfaces separated by liquid. The presence of a film at an air–aqueous interface can also change the forces.     

Bayesian Estimation and Statistical Analysis of Risk Measurements

The Bayesian model are established for the VaR and related risk measurements. The relationship between VaR and other risk measurements including expect shortfall, tail condition expectation and conditional value at risk are discussed. Furthermore, the Bayesian estimates and Bayesian predictors of these risk measurement are derived. Thirdly, the consistency and asymptotic normality in the exponential risk model are proved. Finally, the numerical simulation method is used to verify the convergence rate under different sample sizes.     

Optimal intervention under stress scenarios: A case of the Korean financial system

We consider optimal intervention methods under budget constraints when financial systems face economic shocks. We propose two policies formulated by mixed-integer linear programs where regulators inject cash into institutions. One is to minimize systemic losses, and the other is to minimize the number of defaulting institutions. Using publicly available data on the Korean financial system, we construct its entire network and apply stress scenarios to the system to compare the performances of intervention strategies and derive insights on their workings.     

平行平板横向剪切干涉仪装调误差的矫正方法研究

对平行平板双光路横向剪切干涉仪的装调进行了研究,提出了一种矫正两个平行平板之间角度误差的方法.输出激光的波前采用Zernike多项式拟合,经过理论推导,发现两个方向差分波前求解出的倾斜像散之差与平行平板的角度误差存在线性关系,利用两个方向倾斜像散之差来矫正两个平行平板之间的角度误差.在平行平板横向剪切干涉仪的装调过程中使两个方向差分波前的倾斜像散之差为零即可以使两个方向的平行平板之间的角度误差值为零.进一步地从实验上证明了这个线性关系,对于所用的实验系统,当离焦像差为-3.224 7±0.001 8,两个方向差分波前的倾斜像散之差波动范围为±2.0×10^-3时,平行平板的角度误差可以控制在8.82″之内,高阶像差对平行平板的角度误差调节精度的影响约为1.63″.该方法具有装调简单、精确度高,易于流程化操作的优点.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part II

This is the part II of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS–MS) detection in LC (as opposed to the “conventional” detectors). The Part II starts with briefly introducing the main quantitation methods and then addresses the performance related to quantification: linearity of signal, sensitivity, precision, trueness, accuracy, stability and measurement uncertainty. The last section is devoted to practical considerations in validation. With every performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to handle it, specifically in the case of LC–MS methods.